There is no single price per square metre for composite decking. The final figure depends on four factors: the board you choose, the installation type, how the space will be used and the shape of the area.

In this article, we explain how much each one weighs in and show how much material goes into 1 m² of CDECK decking in each scenario. To find out the price of your deck, use the simulator.

Simulate my deck

What makes the price of composite decking vary

The board

Not all composite decking is the same. Composition, strength and warranty vary from one manufacturer to another, and the price reflects those differences. CDECK offers three boards: the CDECK Original® hollow board, the CDECK Original® solid board and CDECK WUUDE®, a hollow board with a capped finish. The price varies depending on the board you choose.

Hollow vs. solid composite decking

The installation type

The base the deck will sit on determines the structure, and the structure determines the amount of material. The Quick-Fix® system provides for three installation types.

CDECK composite decking Type 1 installation – Regular base fixed with screws
Type 1

Regular base

A level base that can be drilled. The Quick-Fix joists rest along their full length and are fixed with screws.

CDECK composite decking Type 2 installation – Uneven base fixed with screws
Type 2

Uneven base

A base that can be drilled, but with irregularities that prevent the joists from resting along their full length. Fixing is also done with screws.

CDECK composite decking Type 3 installation – Raised or non-drill installation
Type 3

Raised installation

For when the base cannot be drilled or the floor needs to be raised, such as over waterproofing membranes or compacted ground.

Installation guide

The use: residential or commercial

In a garden, on a balcony or around the pool of a private home, foot traffic is moderate. On a café terrace, a boardwalk or around a hotel pool, use is far more intensive, and the structure has to keep up. The board is the same. What changes is the number of joists, clips and screws per m².

The shape of the area

A flat, rectangular area is the simplest scenario. Cut-outs, curves, changes in level or steps call for Fasteners, CDECK® steps and other accessories, which add to the cost.

Accessories

How much material goes into 1 m² of CDECK decking

The quantities are indicative and serve as a reference for planning and comparing quotes.

Installation types 1 and 2

ItemResidential (Qty/m²)Commercial (Qty/m²)
Board 2300x140x243.003.00
Quick-Fix Joist 2300x45x271.311.52
Quick-Fix Intermediate Clip2023
Quick-Fix Terminal Clip23
6x60 Stainless Steel Screw with Ø8 Wall Plug911
3.5×25 Stainless Steel Self-Drilling Screw34

Installation type 3 (residential and commercial, maximum load 200 kg/m²)

ItemQty/m²
Board 2300x140x243.00
Quick-Fix Aluminium Joist 2300x45x271.52
Aluminium Tube 2300×80×40×1.80.88
CDECK Plot2.21
Self-Levelling Plot Fixer 40-50 mm2.21
Quick-Fix Intermediate Clip23
Quick-Fix Terminal Clip3
5.5×25 Stainless Steel Self-Drilling Screw8
3.5×25 Stainless Steel Self-Drilling Screw4

How to find out the price of your deck

If the area has cut-outs or steps, or you need help choosing the installation type, our team will prepare the quote with you.

Get in touch